Modulo ricetrasmettitore RF RC-CC1310F-915

multicanaleprogrammabiledi dati

Ultra Low Power sub 1GHz Multichannels Radio Transceiver + 16Mbite Flash Memory. Multichannel transceiver for low-power wireless applications. The hardware is based on the Texas Instruments CC1310F128 chip. The CC1310 device is the first in a family of ultra-low-power sub-1 GHz wireless MCUs of the economic type. The CC1310 device combines a flexible low-power RF transceiver with a powerful 48 MHz Cortex-M3 microcontroller in a platform that supports multiple physical layers and RF standards. A dedicated radio controller (Cortex-M0) manages low-level RF protocol commands stored in ROM or RAM, ensuring flexibility and ultra-low power. The low power consumption of the CC1310 device does not compromise RF performance; the CC1310 device has excellent sensitivity and robustness (selectivity and blocking). Compared to the standard module (RC-CC1310-XXX), the "F" version features a 16M-bit serial flash memory (GD25Q16CEIG), programmable via an SPI interface already wired internally. The additional FLASH memory can be used for: - Storing and collecting data. - Storing images that can be loaded into the internal flash at startup using a boot image manager. An application has been developed using this module (free) where you can check and download the C source code. See the following hyperlink: https://github.com/joembedded/JesFs. Technical Characteristics: - Supply Voltage: 2.70 to 3.80 Volt - Current Consumption (RX mode): 5.50 mA - Current Consumption (TX mode +10dBm): 13.40 mA - Current Consumption (TX mode +14dBm): 23.50 mA - Current Consumption Standby mode: 0.70 µA - Current Consumption Shut Down Mode: 185 nA - Frequency Band: 915 MHz - Frequency Error: ±10 ppm - RF Power Output: -10.0 to +14.0 dBm - RF Sensitivity 50kbps: -110 dBm - Long Range Sensitivity 625bps: -124 dBm - Data Rate: 0.01 to 4.0 Mbit/s - Temperature Range: -30 to 75 °C. Pinout Table: - 1: GND - Ground - 2: DIO-1 - GPIO, Sensor Controller, High Drive capability - 3: DIO-2 - GPIO, Sensor Controller, High Drive capability - 4: DIO-3 - GPIO, Sensor Controller, High Drive capability - 5: DIO-4 - GPIO, Sensor Controller, High Drive capability - 6: DIO-5 - GPIO, Sensor Controller, High Drive capability - 7: DIO-6 - GPIO, Sensor Controller, High Drive capability - 8: DIO-7 - GPIO, Sensor Controller, High Drive capability - 9: GND - Ground - 10: VDD - Power Supply - 11-13: Not Used - 14: DIO-11 - GPIO - 15: DIO-12 - GPIO - 16: DIO-13 - GPIO - 17: DIO-14 - GPIO - 18: DIO-15 - GPIO - 19: TMSC - JTAG TMSC, High Drive capability - 20: TCKC - JTAG TCKC - 21: DIO-16 - GPIO, JTAG TDO, High Drive capability - 22: DIO-17 - GPIO, JTAG TDI, High Drive capability - 23: DIO-18 - GPIO - 24: DIO-19 - GPIO - 25: Not Used - 26: DIO-21 - GPIO - 27: DIO-22 - GPIO - 28: RST - RESET Active low - 29: DIO-23 - GPIO, Sensor Controller, Analog - 30: DIO-24 - GPIO, Sensor Controller, Analog - 31: DIO-25 - GPIO, Sensor Controller, Analog - 32: DIO-26 - GPIO, Sensor Controller, Analog - 33: DIO-27 - GPIO, Sensor Controller, Analog - 34: DIO-28 - GPIO, Sensor Controller, Analog - 35: DIO-29 - GPIO, Sensor Controller, Analog - 36: DIO-30 - GPIO, Sensor Controller, Analog - 37: GND - Ground - 38: ANT - Antenna PAD - 39: GND - Ground. Key Features / Technical Specifications: - Ultra low power sub-1GHz multichannel radio transceiver - Based on Texas Instruments CC1310F128 - 16M-bit onboard serial flash memory (GD25Q16CEIG) - Programmable via SPI interface - Flexible RF transceiver with Cortex-M3 48MHz microcontroller - Dedicated radio controller (Cortex-M0) - Excellent RF sensitivity and robustness - Frequency: 915 MHz - Supply voltage: 2.7V - 3.8V - Current consumption (RX): 5.5 mA - Current consumption (TX +10dBm): 13.4 mA - Current consumption (TX +14dBm): 23.5 mA - Standby current: 0.7 µA - Shutdown current: 185 nA - RF output power: -10 dBm to +14 dBm - RF sensitivity: -110 dBm (50kbps), -124 dBm (625bps) - Data rate: 0.01 to 4.0 Mbit/s - Operating temperature: -30°C to +75°C.