Product IntroductionWidely used in the installation and maintenance of various large transformer equipment, wind power generation, thermal power generation and power supply bureaus for oil purification and vacuum hot oil circulation drying. Suitable for purification of insulating oil in transformers of 35KV-110KV-220KV; vacuum drying can be performed simultaneously with filtration. The dual-stage vacuum oil filter provides rapid dehydration and degassing to remove moisture, gases and harmful light hydrocarbons; a precision multi-stage filtration system effectively removes mechanical impurities; an electric heating constant temperature automatic control system ensures rapid and uniform oil heating and eliminates dead oil zones; the unit supports vacuum pumping and vacuum oil injection and can perform ultimate vacuum extraction for transformers and GIS equipment, meeting varied on-site requirements.
Working principle and processAfter the treated oil passes through the magnetic filter, it enters the coarse filter heater for heating. Heated oil is drawn by the oil suction pump into the spiral spray atomization system, forming a coarse-grained fog that falls into a reaction tower and enters the vacuum separation chamber where moisture evaporates. The oil mist undergoes multi-dimensional evaporation to achieve purification in a short cycle. Oil that has been purified, dehydrated, degassed and deacidified passes through a precision filter under the action of the oil exhaust pump. Water vapor and hot air separated from the vacuum chamber condense into the water tank; residual gases and non-condensable components are discharged by the vacuum pump after cooling.
Technical parametersItem | Unit | Spec
Model | | SY/ZD-RM-150
Volume of flow | L/min | 150
Volume of flow | L/H | 8000-10000 (Variable frequency adjustable)
Temperature control range | ℃ | 0~100
Working temperature | ℃ | 20~60
Extreme vacuum | pa | ≤20
Working vacuum degree | Mpa | -0.06~-0.099
Gas content in oil | % | ≤0.1
Work pressure | Mpa | ≤0.5
Filtration accuracy | µm | ≤1
Water content in oil | ppm | ≤3
Oil breakdown voltage | KV | ≥65
Heating power | KW | 72
Total power | KW | 80
Power supply | | Three-phase five-wire system 380V 50HZ
Inlet/outlet pipe diameter | mm | 50
Continuous working hours | H | ≥800
Trouble-free working hours | H | ≥8600
Oil quality indicators after insulating oil treatmentPerformance project | Unit | Post-processing indicators | Test method
1. Moisture content | % | none | GB/T511
2. Moisture content | PPM | ≤3 | GB/T7600
3. Pressure resistance value | KV | ≥65KV | GB, DL or IEC standards
4. Residual gas | ≤1% | ≤0.5 | Gas content measurement methods in accordance with relevant GB, DL or IEC standards
5. Acid value | | 1µm |
Product features- The combination of high vacuum, high pumping speed, annular three-dimensional compound flash evaporation technology and microgram technology efficiently removes water, dissolved micro water, free carbon and gases.
- Multi-layer polymer mesh filtration combined with strong magnetic electrostatic adsorption offers large filtration area, strong pollutant holding capacity and high filtration accuracy (ß3 ≥ 1000).
- Compound three-in-one protection device provides automatic protection for high/low oil levels, infrared bubble detection, liquid level control, temperature maintenance and pressure protection; high automation, sensitive and reliable operation.
- Especially suitable for vacuum oil injection, large-scale vacuum pumping and vacuum drying of transmission and transformation equipment above 110KV during installation or maintenance.
- Supports online oil filtration with unmanned operation and operating status displayed by indicator lights.
- Humanized design with low noise, simple operation, long maintenance intervals, low energy consumption and cost savings.
Function of Two-Stage Vacuum Oil FilterThe machine provides high-efficiency dehydration, degassing, filtration and drying of transformer oil. Main components include oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature control and automatic oil temperature control system, electrical control cabinet and a robust steel frame with quality surface finish. The machine performs filtration, purification and regeneration to remove moisture, gas and mechanical impurities in insulating oil efficiently.
Caractéristiques / spécifications techniques- Model: SY/ZD-RM-150
- Flow rate: 150 L/min (8000-10000 L/H, variable frequency adjustable)
- Temperature control range: 0~100 ℃
- Working temperature: 20~60 ℃
- Extreme vacuum: ≤20 pa
- Working vacuum degree: -0.06 ~ -0.099 Mpa
- Gas content in oil: ≤0.1 %
- Work pressure: ≤0.5 Mpa
- Filtration accuracy: ≤1 µm
- Water content in oil: ≤3 ppm
- Oil breakdown voltage after treatment: ≥65 KV
- Heating power: 72 KW
- Total power: 80 KW
- Power supply: Three-phase five-wire system 380V 50HZ
- Inlet/outlet pipe diameter: 50 mm
- Continuous working hours: ≥800 H
- Trouble-free working hours: ≥8600 H